Welcome Guest!   Login   Register   Forgot Password  
   SERIES
CLEARANCE
NEW ITEMS
PROMOTIONS
SEARCH (By Part #
Search | Products | Store Front | Resources | About Us | Distributors | Site Map

 

Medical Industry – Mechanical Plastic Tools

Mechanical plastics are commonly utilized within the medical industry because their composition excels when used in high wear applications such as knee replacements.  These plastics provide low frictional characteristics and weight and machine relatively easily, functioning more as a soft plastic when cut.

 

LMT Onsrud has developed cutting tools specifically designed for the medical industry where increased part finish is required within applications. Our 65-200B and 65-300B ballnose tools have specially designed points and high polish primary clearances allowing the tool to attain a 28Ra finish.

 

Review the tooling selection below for other applications that are found within the medical industry.

 


 

 

Double Flute - Solid Carbide Upcut Spiral Ballnose

52-200B Series

 

  • Upward chip removal.
  • Designed for carving and modeling
    operations.
  • Improved tip geometry.
  • Superior cut compared to most ballnose endmills.

 


 

 

Double Flute - Solid Carbide Upcut Spiral Ballnose

52-200BL Series

 

  • Upward chip removal.
  • Designed for carving and modeling operations.
  • Improved tip geometry.
  • Superior cut compared to most ballnose endmills.
  • BL signifies Extended Length.

 

 

 

Double Flute - Solid Carbide Upcut Spiral
O Flute

52-700 Series

 

  • Upward chip removal.
  • High helix geometry.
  • Cut soft plastic.
  • Provides smooth finish.
  • Special point geometry - improved bottom finish.

Upcut

Downcut

 

Three Flute - Solid Carbide Low Helix Finisher

60-200 Series

 

  • Upward & downcut chip removal.
  • Perfect balance.
  • Creates ultra smooth finish.
  • Wide speed range.
  • Improved part hold down.

 

 

Single Flute - Solid Carbide Downcut Spiral
O Flute

62-700 Series

 

  • Downward chip removal.
  • Provides smooth finish in hard plastics.

 

Single Flute - Solid Carbide Downcut Spiral O Flute

62-750 Series

 

  • Downward chip removal.
  • Provides smooth finish in soft plastics.

 

 

 

Single Flute - Solid Carbide Downcut Spiral
O Flute

62-800 Series

 

  • Downward chip removal.
  • Provides smooth finish in hard plastics.
  • Metric dimensions.


 

 

Single Flute - Solid Carbide Downcut Spiral O Flute

62-850 Series

 

  • Downward chip removal.
  • Provides smooth finish in soft plastics.
  • Metric Dimensions.

 


 

 

Single Flute - Solid Carbide Upcut Spiral
O Flute

63-700 Series

 

  • Upward chip removal.
  • For hard plastics.

 

 

 

Single Flute - Solid Carbide Upcut Spiral O Flute

63-750 Series

 

  • Upward chip removal.
  • For soft plastics.

 

 

 

Single Flute - Solid Carbide Upcut Spiral O Flute

63-800 Series

 

  • Upward chip removal.
  • For hard plastics.
  • Metric tooling dimensions.


 

 

Single Flute - Solid Carbide Upcut Spiral O Flute

63-850 Series

 

  • Upward chip removal.
  • For soft plastics.
  • Metric tooling dimensions.

 


 

 

Two Flute - High Finish Ball
nose for Plastics

65-200B Series

 

  • Upward chip removal.
  • Unique geometry.
  • Specially designed point.
  • Highly polished primary clearance and flute.
  • Tool can create surface finish of 28 Ra in mechanical plastic.
  • Available in standard and metric sizes.


 

 

Four Flute - High Finish Ballnose for Plastics

65-300B Series

 

  • Upward chip removal.
  • Unique geometry.
  • Specially designed point.
  • Highly polished primary clearance and flute.
  • Tool can create surface finish of 28 Ra in mechanical plastic.

 

 

High Speed Steel Plastic Drills

70-500 Series

 

  • Upward chip removal.
  • Produces clean hole in hard or soft plastics.
  • Eliminates chipping.
  • Eliminates chip wrapping.

3 Flute

 

Solid Carbide Taper Tools

77-100 Series

 

  • Upward chip removal.
  • Various taper angles.
  • Standard ballnose point.
  • Provides good finishes on variety of materials.
  • Available in 2 and 3 flutes.

Fractional Plastic Drills

Letter Plastic Drills

Fractional Metric Drills

 

 

 

Contact Us  | Ordering Tracking  | Request A Catalog  | Site Map  | FAQ's  | Product Links
PCD Cutting Tools  | Diamond Drill Bits  | CNC Plastic Cutting Tools  | Metal Cutting Tools
Plastic Drilling Tools  | Composite Cutting Tools  | Technical Articles  | Press Releases
Catalogs and Brochures  | Return Policy  | Dist. Training  | Jobs

ABOUT SSL CERTIFICATES
Toll Free: 1-800-234-1560 | Main: 1-847-362-1560
 
© Copyright 2010 LMT Onsrud All Rights Reserved. info@onsrud.com
 
Join The LMT Onsrud Talent Network