:: Composite Cutters | Carbon Graphite

THINK COMPOSITES!

INTRODUCING ONSRUD'S COMPLETE LINE OF CUTTERS OFFERING SOLUTIONS FOR DIFFICULT TO CUT COMPOSITE MATERIALS

67-500 | CG Tool (Carbon Graphite)

The geometry of these tools increases the amount of effective cutting flutes resulting in superior performance over a standard burr

Usage: Carbide graphite and carbon fiber panels

PART #	CED	CEL	SHK DIA	OAL
67-505	1?8	1?2	1?8	2
67-508	3/16	5/8	3/16	2
67-511	1/4	3/4	1/4	3
67-514	1/4	1-1/2	1/4	3
67-517	5/16	3/4	5/16	3
67-520	3/8	1-1/8	3/8	3
67-523	1/2	1-1/8	1/2	3-1/2
67-526	1/2	2-1/8	1/2	4
67-600 \|	FMR (Fiber Metal Router) Similar to the CG Tool, but the enhanced tooth design allows the tool to cut fiber metals and other abrasive materials quickly and easily. The special clean out flutes allows the material to be quickly removed from the cutting area improving the surface finish.

PART #	CED	CEL	SHK DIA	OAL
67-605	1?8	1?2	1?8	2
67-608	3/16	5/8	3/16	2
67-611	1/4	3/4	1/4	3
67-614	1/4	1-1/2	1/4	3
67-617	5/16	3/4	5/16	3
67-620	3/8	1-1/8	3/8	3
67-623	1/2	1-1/8	1/2	3-1/2
67-626	1/2	2-1/8	1/2	4
View Full Brochure

SERIES	DESCRIPTION	TOOL IMAGES
67-400 \| Solid Carbide Un-Ruffer?	The unique design allows for the cutting performance of a burr while achieving a good surface finish.
68-000 \| Double Edge - PCD Tipped Tooling	Designed for use in abrasive materials where cut quality and tool life are important.
67-300 \| Double Edge - Solid Carbide Compression Spiral	Compression design for fast feed and excellent finish on both sides of the material.
67-000 \| Solid Carbide 67-250 \| Fiberglass Router	Their upcut/downcut diamond design effectively shears fibrous materials. Certain tools in the line have been further developed to cut aramid fiber composites.
67-200 \| Three Edge - Phenolic Cutter	Equally adaptable to low or high spindle speed applications in any CNC machining environment. The free cutting action of the tools provides for better finishes and significantly lower noise levels.
54-300 \| Four Edge - Solid Carbide Downcut Spiral	Designed to be equally adaptable to low or high spindle speed applications in any CNC machining environment. The free cutting action of the tools provides for better finishes.
55-300 \| Four Edge - Solid Carbide Upcut Spiral	Designed to be equally adaptable to low or high spindle speed applications in any CNC machining environment. The free cutting action of the tools provides for better finishes.
52-000 \| Double Edge - Solid Carbide Upcut Spiral	Designed as a general purpose spiral with several times the life of their high speed steel counterparts.They are used when upward chip flow is preferred.
57-000 \| Double Edge - Solid Carbide Downcut Spiral	Designed as a general purpose spiral with several times the life of their high speed counterparts. They are used when a downward chipflow action is preferred.
56-000P \| Double Edge - Solid Carbide Straight	Designed specifically to rout harder, more rigid plastics.
58-000 \| Three Edge - Solid Carbide 59-000 Spiral	Designed to rout difficult to cut material when horsepower or spindle speed may be a problem. They employ upcut router geometry rather than end mill geometry for better chip removal and smoother finish.
54-000 \| Four Edge - Solid Carbide 55-000 Spiral	Equally adaptable to low or high spindle speed applications in any CNC machining environment. The free cutting action of the tools
53-000 \| Three Edge - Solid Carbide Straight	Designed for routing extremely hard materials or when spindle RPM is lower than normal for routing.
30-000 \| Replaceable Ring Type Honeycomb Cutter	These tools are for contouring, carving and chamfering cuts of .25" or less. The unique patented holding system prevents the solid carbide blades from coming out of the holder if it is fractured. The HSS saw blades and the diamond plated blades dish on the bottom so they clear the cut core finish like the hollow round solid carbide style rings. The solid carbide rings may be reground several times at the factory making them very economical to use. The HSS saw and diamond plated blades are disposable, offering the convenience of a constant diameter.
30-300 \| PM-HSS Integral Shank Honeycomb Hogger Cutter Super PM High Speed Steel Hoggers ? High Speed Replaceable Saw Blade Solid Carbide Replaceable Blade ? Diamond Plated Replaceable Blade Shank Diameter	The spiral hogger geometry ground integral to the shank allows for faster feed rates and deeper cuts than any previous cutter. The availability of several different blades makes this cutter suitable for most core types. The new hogger design also imparts less force as it evacuates and shreds scrap.
31-000 \| High Speed Steel Cutter	This cutter is designed primarily for use on aluminum core, offering the versatility of smaller sizes for use on hand-held machines in field or maintenance type repairs. This cutter offers the strength of an integral shank and blade that has an edge sharpness unattainable with any other material. This sharpness and the relieved bottom yield part surfaces that require a minimum of preparation before bonding operation.
32-000 \| PM High Speed Steel Hogger	These cutters are specifically designed for fast (low force) removal of excess core followed by a final finish pass to obtain excellent finishes with one tool. These cutters enable cuts of up to .60? depths in a single pass.The availability of several different blades makes this cutter suitable for most core types. All assemblies require a shank, hogger and blade.