Think Mechanical Plastics | | | .Brochure List | | | . | | | MILLING AND ROUTING TOOLS FOR MECHANICAL PLASTICS (ABS, Acetal, Delrin, Delrin II, Hydrex, UHMW, PEEK, Nylon, Cast Nylon, Polycarbonate, Polyurethane, Polyester, PTFE, Polyetherimide, Acrylic, PET) |
| * Tooling developed specifically for milling plastics * Output increases of 40 to 50% possible with recommended chiploads at Mechanical Chipload * Open flute design evacuates chips effectively and eliminates rewelding * Design allows for roughing and finishing with one tool * Deburring eliminated as a result of finer surface finishes 52-000 . | | Double Edge - Solid Carbide Upcut Spiral Designed as a general purpose spiral with several times the life of their high speed steel counterparts. They are used when upward chip flow is preferred. | 
| . PART # | CED | CEL | SHK DIA | OAL | 52-040 | 1/8 | 1/2 | 1/4 | 2 | 52-050 | 5/32 | 9/16 | 1/4 | 2 | 52-060 | 3/16 | 5/8 | 1/4 | 2 | 52-060L | 3/16 | 5/8 | 1/4 | 2 | 52-070 | 7/32 | 5/8 | 1/4 | 2-1/2 | 52-080 | 1/4 | 3/4 | 1/4 | 2-1/2 | 52-080L | 1/4 | 3/4 | 1/4 | 2-1/2 | 52-090 | 9/32 | 3/4 | 3/8 | 2-1/2 | 52-100 | 5/16 | 13/16 | 3/8 | 2-1/2 | 52-120 | 3/8 | 7/8 | 3/8 | 2-1/2 | 52-140 | 7/16 | 1 | 1/2 | 3 | 52-160 | 1/2 | 1 | 1/2 | 3 | HELIX ANGLE = 300 | | L = Left Hand Rotation |
| 52-200B/BL | | Double Edge - Solid Carbide Upcut Spiral Designed for carving and modeling operations. Their improved tip geometry gives a superior cut compared to most ballnose endmills. | 
| 52-200B PART # | CED | CEL | SHK DIA | OAL | 52-235B | 1/16 | 1/4 | 1/8 | 2 | 52-244B | 1/8 | 1/2 | 1/8 | 2 | 52-240B | 1/8 | 1/2 | 1/4 | 2 | 52-260B | 3/16 | 3/4 | 1/4 | 2 | 52-280B | 1/4 | 7/8 | 1/4 | 2-1/2 | 52-320B | 3/8 | 1-1/8 | 3/8 | 3 | 52-360B | 1/2 | 1-1/8 | 1/2 | 3 | 52-386B | 5/8 | 2-1/4 | 5/8 | 4 | 52-397B | 3/4 | 2-1/2 | 3/4 | 5 | | | | | | 52-200BL EXTENDED LENGTH | | | | 52-235BL | 1/16 | 1/4 | 1/8 | 3 | 52-244BL | 1/8 | 1/2 | 1/8 | 3 | 52-240BL | 1/8 | 1/2 | 1/4 | 3 | 52-260BL | 3/16 | 3/4 | 1/4 | 3 | 52-280BL | 1/4 | 1 | 1/4 | 4 | 52-320BL | 3/8 | 1-1/4 | 3/8 | 4 | 52-360BL | 1/2 | 1-1/2 | 1/2 | 5 | 52-386BL | 5/8 | 2-1/2 | 5/8 | 5 | 52-397BL | 3/4 | 3 | 3/4 | 6 | HELIX ANGLE = 300 ** | | | |
|
|
|
|
|
|
Enter your email address
to receive discounts. |
|
|
|
|
|
|
|
|
|
