:: Plastic Drilling | High Speed Steel Drill

Brochure List

THINK PLASTIC DRILLING

NO Wrapping

NO Cleaning

NO Melting

NO Surface Marring

NO Interrupted Operation

FASTER, CLEANER HOLES

HSS PLASTIC DRILLS

Onsrud?s high-speed-steel drills are designed to produce holes in hard and soft plastic while eliminating edge chipping and chip wrapping. The point is specially ground at a 60� angle for gradual penetration into the material while eliminating cracking and chipping. The 0� rake angle on the cutting edge eliminates grabbing as the drill exits through the material producing a clean hole.

Custom sizes can be made upon request.

FRACTIONAL DRILLS

PART #	CED	CEL	SHK DIA	OAL
70-502	1/8 (0.125)	1-1/2	1/8	2-3/4
70-503	9/64 (0.141)	1-3/4	9/64	2-1/2
70-506	5/32 (0.156)	1-15/16	5/32	2-1/2
70-509	11/64 (0.172)	1-3/4	11/64	2-3/4
70-510	3/16 (0.188)	2-1/8	3/16	2-3/4
70-511	13/64 (0.203)	2-7/16	13/64	3
70-512	7/32 (0.219)	2-1/2	7/32	3
70-513	15/64 (0.234)	2-5/8	15/64	3-1/4
70-514	1/4 (0.250)	2/7/16	1/4	3-1/4
70-515	17/64 (0.266)	2-7/8	17/64	3-1/2
70-516	9/32 (0.281)	2-15/16	9/32	3-1/2
70-517	19/64 (0.297)	3-1/16	19/64	3-3/4
70-520	5/16 (0.313)	1-3/4	1/4	3-7/8
70-521	21/64 (0.328)	3-5/16	21/64	4
70-522	11/32 (0.344)	3-7/16	11/32	4
70-523	23/64 (0.359)	3-1/2	23/64	4
70-524	3/8(0.375)	2-1/4	3/8	4-1/4
70-525	25/64 (0.391)	3-3/4	25/64	4-1/2
70-526	13/32 (0.406)	3-7/8	13/32	4-1/2
70-527	27/64 (0.422)	3-15/16	27/64	4-1/2
70-528	7/16 (0.438)	2-1/2	7/16	4-1/2
70-529	29/64 (0.453)	4-3/16	29/64	4-3/4
70-530	15/32 (0.469)	4-5/16	15/32	4-3/4
70-531	31/64 (0.484)	4-3/8	31/64	4-3/4
70-532	1/2 (0.500)	2-5/8	1/2	5-1/8
70-533	33/64 (0.516)	3-1/8	1/2	6
70-534	17/32 (0.531)	3-1/8	1/2	6
70-535	35/64 (0.547)	3-1/8	1/2	6
70-536	9/16 (0.563)	3-1/8	1/2	6
70-537	37/64 (0.578)	3-1/8	1/2	6
70-538	19/32 (0.594)	3-1/8	1/2	6
70-539	39/64 (0.609)	3-1/8	1/2	6
70-540	5/8 (0.625)	3-1/8	1/2	6
70-541	41/64 (0.641)	3-1/8	1/2	6
70-542	21/32 (0.656)	3-1/8	1/2	6
70-543	43/64 (0.672)	3-1/8	1/2	6
70-544	11/16 (0.688)	3-1/8	1/2	6
70-545	45/64 (0.703)	3-1/8	1/2	6
70-546	23/32 (0.713)	3-1/8	1/2	6
70-547	47/64 (0.609)	3-1/8	1/2	6
70-548	3/4 (0.750)	3-1/8	1/2	6
70-549	49/64 (0.766)	3-1/8	1/2	6
70-550	25/32 (0.781)	3-1/8	1/2	6
70-551	51/64 (0.797)	3-1/8	1/2	6
70-552	13/16 (0.813)	3-1/8	1/2	6
70-553	53/64 (0.828)	3-1/8	1/2	6
70-554	27/32 (0.844)	3-1/8	1/2	6
70-555	55/64 (0.859)	3-1/8	1/2	6
70-556	7/8 (0.875)	3-1/8	1/2	6
70-557	57/64 (0.891)	3-1/8	1/2	6
70-558	29/32 (0.906)	3-1/8	1/2	6
70-559	59/64 (0.922)	3-1/8	1/2	6
70-560	15/16 (0.938)	3-1/8	1/2	6
70-561	61/64 (0.953)	3-1/8	1/2	6
70-562	31/32 (0.969)	3-1/8	1/2	6
70-563	63/64 (0.984)	3-1/8	1/2	6

PLASTIC DRILLS WITH SPECIAL POINT

WIRE DRILLS

PART #	CED	CEL	SHK DIA	OAL
70-630	1 (0.228)	2-5?8	0.228	3-7?8
70-631	2 (0.221)	2-5?8	0.221	3-7?8
70-632	3 (0.213)	2-1?2	0.213	3-3?4
70-633	4 (0.209)	2-1?2	0.209	3-3?4
70-634	5 (0.206)	2-1?2	0.206	3-3?4
70-635	6 (0.204)	2-1?2	0.204	3-3?4
70-636	7 (0.201)	2-7?16	0.201	3-5?8
70-637	8 (0.199)	2-7?16	0.199	3-5?8
70-638	9 (0.196)	2-7?16	0.196	3-5?8
70-639	10 (0.194)	2-7?16	0.194	3-5?8
70-640	11 (0.191)	2-5?16	0.191	3-1?2
70-641	12 (0.189)	2-5?16	0.189	3-1?2
70-642	13 (0.185)	2-5?16	0.185	3-1?2
70-643	14 (0.182)	2-3?16	0.182	3-3?8
70-644	15 (0.180)	2-3?16	0.180	3-3?8
70-645	16 (0.177)	2-3?16	0.177	3-3?8
70-646	17 (0.173)	2-3?16	0.173	3-3?8
70-647	18 (0.170)	2-1?8	0.170	3-1?4
70-648	19 (0.166)	2-1?8	0.166	3-1?4
70-649	20 (0.161)	2-1?8	0.161	3-1?4
70-650	21 (0.159)	2-1?8	0.159	3-1?4
70-651	22 (0.157)	2	0.157	3-1?8
70-652	23 (0.154)	2	0.154	3-1?8
70-653	24 (0.152)	2	0.152	3-1?8
70-654	25 (0.150)	1-7?8	0.150	3
70-655	26 (0.147)	1-7?8	0.147	3
70-656	27 (0.144)	1-7?8	0.144	3
70-657	28 (0.141)	1-3?4	0.141	2-7?8
70-658	29 (0.136)	1-3?4	0.136	2-7?8
70-659	30 (0.129)	1-5?8	0.129	2-3?4
70-660	31 (0.120)	1-5?8	0.120	2-3?4

LETTER DRILLS

PART #	CED	CEL	SHK DIA	OAL
70-600	A (0.234)	2-5/8	0.234	3-7/8
70-601	B (0.238)	2-3/4	0.238	4
70-602	C (0.242)	2-3/4	0.242	4
70-603	D (0.246)	2-3/4	0.246	4
70-604	E (0.250)	2-3/4	0.250	4
70-605	F (0.257)	2-7/8	0.257	4-1/8
70-606	G (0.261)	2-7/8	0.261	4-1/8
70-607	H (0.266)	2-7/8	0.266	4-1/8
70-608	I (0.272)	2-7/8	0.272	4-1/8
70-609	J (0.277)	2-7/8	0.277	4-1/8
70-610	K (0.281)	2-15/16	0.281	4-1/4
70-611	L (0.291)	2-15/16	0.291	4-1/4
70-612	M (0.295)	3-1/16	0.295	4-3/8
70-613	N (0.302)	3-1/16	0.302	4-3/8
70-614	O (0.316)	3-3/16	0.316	4-1/2
70-615	P (0.323)	3-5/16	0.323	4-5/8
70-616	Q (0.332)	3-7/16	0.332	4-3/4
70-617	R (0.339)	3-7/16	0.339	4-3/4
70-618	S (0.348)	3-1/2	0.348	4-7/8
70-619	T (0.358)	3-1/2	0.358	4-7/8
70-620	U (0.368)	3-5/8	0.368	5
70-621	V (0.377)	3-5/8	0.377	5
70-622	W (0.386)	3-3/4	0.386	5-5/8
70-623	X (0.397)	3-3/4	0.397	5-5/8
70-624	Y (0.404)	3-7/8	0.404	5-1/4
70-625	Z (0.413)	3-15/16	0.413	5-1/4

METRIC DRILLS

PART #

CED

CEL

SHK DIA

OAL

70-714

3.00 (0.118)

3.00

70-715

3.50 (0.138)

3.50

70-716

4.00 (0.157)

4.00

70-717

4.50 (0.177)

4.50

70-718

5.00 (0.197)

5.00

70-719

5.50 (0.217)

5.50

70-720

6.00 (0.236)

6.00

102

70-721

6.50 (0.256)

6.50

105

70-722

7.00 (0.276)

7.00

105

70-723

7.50 (0.295)

7.50

111

70-724

8.00 (0.315)

8.00

114

70-725

8.50 (0.335)

8.50

121

70-726

9.00 (0.354)

9.00

124

70-727

9.50 (0.374)

9.50

127

70-728

10.00 (0.394)

10.00

130

70-729

10.50 (0.413)

10.50

133

70-730

11.00 (0.433)

103

11.00

140

70-731

11.50 (0.453)

106

11.50

143

70-732

12.00 (0.472)

111

12.00

149

70-733

12.50 (0.492)

114

12.50

152

70-734

13.00 (0.512)

114

13.00

152

70-735

13.50 (0.531)

122

13.50

168

70-736

14.00 (0.551)

122

14.00

168

70-737

14.50 (0.571)

122

14.50

168

70-738

15.00 (0.591)

132

15.00

181

70-739

15.50 (0.610)

132

15.50

181

70-740

16.00 (0.630)

132

16.00

181

70-741

16.50 (0.650)

132

16.50

181

70-742

17.00 (0.669)

143

17.00

194

70-743

17.50 (0.689)

143

17.50

194