Brochure List . | . Stainless Steel | | Cutting stainless steel on a router can be a challenging task due to the high spindle RPM?s. Onsrud solved this problem by developing a line of tools which are capable of running at high speeds and providing good tool life. Our cutting geometry also provides an excellent side and bottom finish in a wide variety of stainless grades. Solid Carbide Double Edge Upcut Spiral Part Number | CED | CEL | Shank | OAL | List Price | 83-305AlTiN | 1/8 | 1/4 | 1/8 | 2 | $26.80 | 83-310AlTiN | 3/16 | 3/8 | 3/16 | 2-1/2 | $37.20 | 83-315AlTiN | 1/4 | 3/8 | 1/4 | 2-1/2 | $38.75 | 83-320AlTiN | 3/8 | 1/2 | 3/8 | 3 | $54.70 |
. Cutting Parameters Part Number | RPM | Feedrate | Depth of Cut | 83-305AlTiN | 18,000 | 18 IPM | .012 | 83-310AlTiN | 12,000 | 20 IPM | .020 | 83-315AlTiN | 9,000 | 25 IPM | .030 | 83-320AlTiN | 6,010 | 27 IPM | .045 |
. Notes * Different grades of stainless steel may dramatically affect the performance of the tool. * Your depth of cut is critical to ensure proper tool performance; too heavy of a depth of cut can cause immediate tool failure. * Coolant or a mister is required for proper tool performance. * Do not use your dust collector when cutting stainless steel, as it may cause a fire. | 
83-300
Series
|
|
|
|
|
Enter your email address
to receive discounts. |
|
|
|
|
|
|
|
|
|
