| View Brochures | View or Download
PDF
. | Description |
 | | |
| | |
| | |
| LMT Onsrud New Products | | |
| Marathon
Compressions |
. | The Onsrud Marathon is the longest
running compression tool due to advancements in cutting geometry and the
addition of a unique Onsrud coating. Longer cutting tool life is due to the
advanced coating creating a harder and tougher cutting edge. |
| Monocrystalline
Polishing | | The 75-000
series consists of 5/16” and 3/8” diameter tools which incorporate
a monocrystalline diamond edge on a solid carbide body. The single crystal
structure of the diamond will produce a near optically clear edge and replace
buffing or flame polishing. Polishing of curved edges and internal profiles
can now be done directly on the CNC router. |
| Honeycomb | 
. | Tooling for fabrication of honeycomb
core and panel. Brochure contains new product including diamond grit, solid
carbide, and reduced weight hoggers designed for today's high-tech materials.
Honeycomb cutters are used in the aerospace, automotive, marine, wind energy
and other industries where low weight, high strength construction is
required. |
| 5 Flute End
Mills |
. | Slot, profile, and semi-finish with
Onsrud's 5 Flute high-performance end mills. The 5 flute tools can be run at
feed rates 20% over 4 flute tools. Suitable for use in titanium and other
high-temp alloys. |
Saw Blades
| | Onsrud Cutter is proud to present our new line of saw blades. A
trendsetter in cutting tool technology, Onsrud Cutter has always been known for
the highest quality tools and accessories. Our saw blades will continue in this
tradition.
An expanded offering of saw blades from Onsrud for
crosscut applications in a variety of materials along with blades for
non-ferrous and plastic materials. The non-ferrous blades produce burr-free
cuts on materials such as aluminum, copper, brass and bronze. The no-melt
plastic blades run cool in the cut producing a clean, chip-free
edge.. |
Spiral
“O” Flute Tools For Acrylics
Tools For Acrylics |
Not Available in
Print | The
63-500 series of tools have geometry designed specifically for Cast or Extruded
acrylics. The tools will produce excellent edge finishes that eliminates, or
reduces, secondary steps before flame polishing. |
Aluminum
Rougher
Aluminum Rougher |
. | Take advantage of Onsrud Cutter’s
through-coolant roughers. Through coolant provides flow and pressure directly
to the cutting zone. The coolant provides lubricant, dissipates heat and clear
chips, which is especially important during deep cavity work, resulting in
increased tool life and productivity levels.
An improved rougher pattern generates lower cutting
forces and allows for increased feed rates. |
Stainless
Steel
Stainless
Steel |
. | Cutting stainless steel on a router can
be a challenging task due to the high spindle RPM’s. Onsrud solved this
problem by developing a line of tools which are capable of running at high
speeds and providing good tool life. Our cutting geometry also provides an
excellent side and bottom finish in a wide variety of stainless grades.
|
Tuff Core
Compression
Tuff
Core Compression | | First solid-carbide compression that utilizes a tough inner
carbide core for strength and a wear resistant outer shell for long life in
abrasive materials. |
Drilling
Drilling |
Out of
Print | Drills
designed for composite, titanium, aluminum and other non-ferrous
materials. |
CNC Insert
Tooling
CNC
Insert Tooling |
Out of
Print | Line of
insert tools for CNC router applications. Insert tools offer an economical
tooling alternative as resharpening is eliminated due to the replaceable insert
cutting edge design. |
Boring
Bits
Boring Bits
| | Boring bits for boring heads and gang drills. The brad point and
60 degree through-hole bits are made of solid carbide and mounted in high speed
steel shanks and available in right-hand or left-hand rotation and in 57mm or
70mm lengths. The 35mm bit is of carbide-tipped construction and designed to
produce a flat bottom hole for hinge mounting. |
Spanish CNC
|
Out of
Print | Selection of Onsrud’s most popular tools for wood, plastic,
and aluminum in a Spanish language brochure |
PCD
Compression
PCD Compression | | PCD (Polycrystalline Diamond) compression cutting tools for
difficult to cut materials such as melamine sheet, composite wood, or laminated
sheet. |
MDF Panel
Bits
MDF
Panel-Door Bits |
Out of Print | Carbide-tipped bits for the production
of raised panel doors. These bits give the illusion of a raised panel door in
MDF and solid panel materials. |
Plastic
Sawing
Plastic Sawing |
Out of
Print | Line of
plastic cutting saw blades for hard, soft and phenolic plastic materials.
|
Top Loading Router
Bits
Top
Loading Router Bits |
Out of
Print |
Maximizing the usage of your engraving machine with top loading bits that can
be used for the cutting of plastic or aluminum sheet material. |
Taper
Bits
Taper Bits | | Solid carbide tools from 1/8” to 1/4" in cutting
diameter with cutting angles per side ranging from 1 degree to 7 degrees. The
ball nose tip is ideal for 3-D decorative profiles and the taper profile allows
production of draft angles in molds. |
Cutting Edge
Cutting
Edge |
Out of
Print | Selection of new products introduced by Onsrud Cutter. Includes
tools for engraving, cutting of carbon graphite, ardmid, and composite
sheet |
Think
Mechanical
Think Mechanical | | Tooling designed specifically for mechanical plastic material.
Solves problems encountered when using traditional end mill tools, such as chip
rewelding, hand deburring, and slow feed rates. |
Plastic
Drilling
Plastic Drilling |
Out of
Print | High-speed-steel drills are designed to produce holes in hard and
soft plastic while eliminating edge chipping and chip wrapping. |
Spoilboard
Cutters
Spoiboard Cutters | | Insert and carbide-tipped tools for
surfacing spoilboards used on CNC routers |
Specialty
Composite Milling
Specialty Composite Milling | | SERF PCD roughing and finishing tool used to mill carbon fiber,
G-10 and other fiberglass materials. |
Think
Composites
Think Composite
| | Tools designed for milling of
reinforced plastic, composite, and honeycomb materials. |
Composite
Drilling
Composite Drilling |
Out of
Print | Drills
for composite materials that incorporate an 8-facet point design that reduces
cutting forces and eliminates delamination when exiting the material.
|
MaxLife/EXHD
MaxLifeEXHD | | Compression line for high-wear CNC router applications such as the
cutting of melamine- laminated composite wood materials at normal to higher
feed rates. |
Super O Flute
Polished
Super O
Flute Polished |
Out of
Print | “SUPER O” line of polished O-flute tools. The one
tool that is capable of slicing through the toughest materials…plastic,
wood, aluminum, and solid surface. |
Collet
Maintenance
Collet
Maintenance |
Out of
Print | Brochure
detailing collet maintenance procedures for CNC routers. |
Resharping &
Modification
Resharping & Modification | | Use Onsrud to service your tools back to orginal condition. Tools
can be flute or OD ground depending upon your needs. |
| Sign
Making |
Out of
Print | Most
popular tools used in sign making materials such as wood, plastic, and
aluminum. |
| Spiral O Flute
Aluminum |
Out of
Print | Single-edge "O" flute tools with geometry designed for
high removal rate while routing aluminum sheet material. |
| Spiral O Flute
Plastics |
Out of
Print | Single-edge "O" flute tools with geometry designed for
either hard or soft plastics. |
